DC Power Supply QJ3005T 30V- 5A, 40, 220V
₹6,999.00
Product Specification
| Part Number | QJ3005T |
| Mounting Type | NO |
| Maximum Input Voltage | 220V |
| Maximum Operating Temperature | 40 |
| Pin Count | 2 |
| Input Voltage | 30v-5a |
| Power | 30v-5a |
| Output Current | 5A |
| Brand | DC POWER SUPPLY |
| Minimum Order Quantity | 1 |
Related products
-
₹24,499.00
Specifications for this item
-
₹9,999.00Product description:
DPS series products are a three-window four-bit high-precision switching DC regulated power supply , which can display voltage , current and power at the same time . Products are widely used in mobile phone maintenance , computer maintenance , school and production line use , its output voltage and output current can be continuously adjusted between 0 and nominal value .
Power supply stability and ripple coefficient are very good, with USB fast charging function and perfect short circuit protection circuit . It is small in size , beautiful in design , convenient in operation , and can work long hours at full load It is loved by the vast number of users .
Specifications：
Model: DPS3010U
Output voltage: 0-30V for 3010U
Output current: 0-10A for 3010U
Output power: 300W for 3010U
Auxiliary output: USB Quick Chang 18w, Supports multiple quick charging protocols
Input voltage: AC110V, 60HZ
Working TEMP 0-40℃ ; Humidity : 80 % RH
Storage TEMP -10-70℃ ; Humidity : < 70 % RH
C.V: Voltage stability ≤0.1 % + 3mv; Load stability≤0.1 % + 3mv; Ripple noise :≤20mvrms （ Effective value ）
C.C：Current stability ≤0.1 % + 3MA； Load stability≤ 0. 2 % + 3MA； Ripple noise : ≤5mArms （Effective value）
Protection mode：Current limiting protection / short circuit alarm stop output and self-recovery
Display: Four-digit digital tube , three-window display
Accuracy : 0 . 5 % + 3digit
Resolution :Voltage 0.01V; current 0.001A
Product size: L225mm x W90mm x H145mm
Weight: 1.8kg
Fuse: 2A for DPS305U/3A forDPS3010U/3A forDPS605U
Operation instructions:
There are two modes of power output : constant voltage output ( C V ) and constant current output ( C C ) . The output mode is determined by the voltage and current values set by the user and the load that the user receives . The output voltage or current value of the power supply will not exceed the voltage and current value set by the user. In the constant voltage mode , the output voltage is equal to the voltage set by the user. In constant current mode, the output current value is equal to the current value set by the user.
Voltage Regulation
1. Adjust the voltage roughly to the required voltage value , the fine-tune the knob to the required specific voltage value2. In general , the current knob can be adjusted to the maximum , and then the load can be connected for useCurrent regulation
When the user needs to adjust the limiting current output
1. firstly , adjust the voltage to about 5-10V , then short-circuit the positive and negative terminals with wires ( short-circuit alarm needs to be set to C C position )2. Adjust the current to roughly adjust the knob to the required current value , and then fine-tune the knob to the required specific current value3. After disconnecting the short-circuit conductor and adjusting the required voltage by voltage regulation ” method , the connection load can be usedPacking List
1 x whole machine
1x Power cord
1x Output Load Line
1x Instructions
-
₹7,499.00
SUGON 3005D 30V 5A ( Toroidal Transformer ) DC Power Supply Adjustable 4 Digit Display Laboratory Power Supply110/220V Voltage Regulator For Phone Repair Features: 1. High precision 4-digit LED digital display, intuitive and clear. 2. Intelligent fan, excellent heat dissipation, effectively extending fan life and reducing noise. 3. Using advanced technology, it effectively reduces the weight of the power supply …
-
₹6,999.00
– Rated output voltage 0~32V
– Rated output current 0~6A
– Output Power 192W
– Load regulation rate Voltage: <0.3%+5mV
– Current: <0.2%+3mA
– Power regulation rate Voltage: <0.3%+5mV
– Current: <0.2%+3mA
– Set resolution Voltage: 10mV
– current: 1mA
– Readback resolution Voltage: 10mV
– current: 1mA
– Setting accuracy: (25°C±5°C) Voltage: <0.5%+5mV
– Current: <0.2%+3mA
– Ripple and noise: (20Hz~20MHz) Voltage: ≤10mVrms , Current: ≤2mArms
– Display type LED digital tube display
– voltage AC 220V±10%
– frequency 50Hz/60Hz
– Size (W*H*D) 80mm × 150mm × 230mm
– weight 2 kg -
₹6,999.00
YIHUA 305D-IV Regulated Variable DC Lab Power Supply 0-5A 0-30V Low Noise Bench Switch Mode Power Supply with Alligator Clips, High Precision for R&D, Labs, Laptops, Phone Repair & Electronic DIY
Reviews
There are no reviews yet.